 |
|
| Stationary Electric LP/NG & Diesel Fired 140F, 230V Single Phase | ||
| 09147A | 4 GPM/2000 PSI 5.0 HP/230V/ 25A/ 1 Ph. NG | $ 4750.00 |
| 09148A | 4 GPM/2000 PSI 5.0 HP/230V/ 25A/ 1 Ph. LP | $ 4810.00 |
| Stationary Electric LP/NG & Diesel Fired 140F, 230V or 460V 3 Phase | ||
| Stationary Electric LP/NG & Diesel Fired 140F, 230V or 460V 3 Phase | ||
| 09143A | 4 GPM/2000 PSI 5.0 HP/ 230 or 460V/ 14A/ NG | $ 4685.00 |
| 09144A | 4 GPM/2000 PSI 5.0 HP/ 230 or 460V/ 14A/ LP | $ 4750.00 |
| 09139A | 4 GPM/3000 PSI 7.5 HP/ 230 or 460V/ 11A/ NG | $ 5060.00 |
| 09140A | 4 GPM/3000 PSI 7.5 HP/ 230 or 460V/ 11A/ LP | $ 5125.00 |
| 09133A | 5 GPM/3000 PSI 10 HP/ 230 or 460V/ 14A/ NG | $ 5810.00 |
| 09134A | 5 GPM/3000 PSI 10 HP/ 230 or 460V/ 14A/ LP | $ 5875.00 |
| Optional Diesel Burner Add $230.00 | ||
| Key Features: | ||
| Heavy-duty electric motor with high quality belt driven triplex pump. Dual belt drive configuration enables the pump to run at reduced rpm. Vertical burner with 12" draft diverter and clean burning, fuel efficient, vertical combustion chamber. Full 140 F heat rise in water temperature up to a high limit of 230 F. All controls located on a single instrument control panel. Hour meter is standard equipment. Belt guard and control panel are covered with a protective shroud. Motor and pumping system are easily accessible for service or repair. 24-volt electric controls. Pilot shut-off valve. |
||
| Standard Accessories: | ||
| Comes complete with trigger gun / insulated wand assembly, 50' pressure hose w/couplers, chemical injector and spray nozzles. | ||
| Options: | ||
|
Oil-fired with fuel tank, add $220.00 24VAC, add $125.00 Thermostatic control, add $180.00 Remote control box (wire loop not provided) add $385.00 Stainless steel wrapper and control panel, add $750.00 Diesel Burner, add $230.00 |
||
| Dimensions: | ||
|
120-volt units, 51L X 22.5 W X 48"H 230 & 460-volt units, 51L X 22.5 W X 51.7"H |
||
| | SHIPPING RATES | DELCO HOME | CMC HOME | E-MAIL | DELCO SURFACE CLEANERS | |
| WARRANTY / RETURNS / TERMS / CONDITIONS: |
| All equipment sold by CMC carries a manufacturer's warranty. The manufacturer will determine replacement or repair of warranty items. Non-defective merchandise returned will be subject to a 25% restocking fee. Pre-approved authorization code must be obtained from CMC within 7 days of delivery for non-defective returns. The returned items must be in new condition and in their original packaging. All returned items must be accompanied by a pre-approved authorization code obtained from CMC. Customer assumes all shipping and handling charges. All merchandise, shipping and handling must be prepaid. Payment methods, Visa/MasterCard, Discover, American Express, check or money order (US funds only). While we do make an effort to keep the prices on this site updated regularly, they are subject to change without notice. |
| To place your order please call: |
| CMC Pressure Washers & Equipment LLC. On-line Since 1998 South Georgia (800) 544-2111 Toll Free (850) 567-0028 Mon. - Sat. 8AM-9PM EST |
|---|
![[Assurance of VALID HTML]](../art/vhtml.gif){kind=small}